Configuring and Managing Host-Based X.25 Links - Edition 6 (36939-90057)

Configuring X.25 Links Step-by-Step
Modify the Network Management Configuration File
Chapter 6
137
1. If you are using domain names for network access, replace the node name in the field
at the bottom of the screen with this system’s domain name and press the
[Save Data]
key. If not using domain names, leave the local HP 3000 node name in this field.
2. Press the
[Guided Config]
key to proceed with guided configuration of X.25 iX System
Access.
Fields Local domain name The name of this system in the ARPANET standard format. This
name can be used by other nodes on the network to access this host.
The domain name is composed of labels, with each label separated by a
period. Each label must start with a letter or digit, and have as interior
characters only letters, digits, hyphens (-), or underbars (_). A domain
name may have any number of labels, but its total length, including
periods, is limited to 255 characters.
label[.label][...]
Domain names are not case sensitive.
Use of domain names is optional. If you are not using domain names
for network access, leave the local HP 3000 node name in this field.
Step 5: Perform Guided Network Transport Configuration
NMMGR displays the Network Transport Configuration screen (Figure 6-4) if you press
the
[Guided Config]
key at the NS Configuration screen.
Figure 6-4 Network Transport Configuration Screen