Communicator e3000 MPE/iX Release 7.5 (Software Release C.75.00) (30216-90336)

Chapter 4
Fibre Channel Device and Adapter Support on HP e 3000 Systems
Configuration Examples for Fibre Channel Adapters and Devices
39
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu >
From the Main menu, proceed to the Information menu:
Console Display #2:
Main Menu: Enter command or menu > in
---- Information Menu -------------------------------------------------
Command Description
------- -----------
ALL Display all system information
BootINfo Display boot-related information
CAche Display cache information
ChipRevisions Display revisions of major VLSI
COprocessor Display coprocessor information
FRU Display FRU information
FwrVersion Display firmware version
IO Display I/O interface information
LanAddress Display Core LAN station address
MEmory Display memory information
PRocessor Display processor information
SerialNum Display serial number
WArnings Display selftest warning messages
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>] Display help for specified command
RESET Restart the system
MAin Return to Main Menu
----
Information Menu: Enter command >
For the purposes of this article we are only interested in the I/O information for this system. The “I/O”
function will provide two sets of information in two sections. The first section is the listing of the System and
Local Bus Adapters; the Local Bus Adapters with slot numbers 1-12 are potential Device Adapter locations.
The second section is the listing of PCI Device Adapters that are actually present on the system. These
controllers are either Device Adapter Cards or the embedded functions of the Core I/O Card.
Console Display #3:
Information Menu: Enter command > io