APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

98 Chapter4
APPC Subsystem Configuration
Configuring the APPC Subsystem
Figure 4-15 Transaction Program Data Screen
Fields
Job Name
Required. This is the 26-character location
(
filename.groupname.accountname ) of the job file
that runs the local TP. This file must not contain any
lockwords. When the APPC subsystem receives an
allocate request from the remote TP, it streams this job,
which runs the local TP.
If you want to start the local TP manually, leave this
field blank and configure N in the Automatic TP
Startup field.
Time-out Value
This parameter tells the APPC subsystem how long to
wait for an allocate request from the remote TP after
the local TP calls the MCGetAllocate intrinsic. If the
timer expires before an allocate request arrives, the
MCGetAllocate intrinsic returns with a status info
value of +29. For more information on the
MCGetAllocate intrinsic, see the LU 6.2 API
Application Programmer’s Reference Manual.
Allowable Time-out Values are as follows:
1–480 minutes If Queued Allocate Requests = Y.
(A Time-out Value of 0 is not allowed
if allocate requests are queued.)