APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

60 Chapter3
Control Operator Intrinsics
>0 Execution was successful, but a warning condition was
encountered. The positive value corresponds to a
warning message in set 11 of the APPC message
catalog, CATAPPC.APPC.SYS. APPC subsystem
warning messages are followed by (APPCWARN
xxxx ),
where
xxxx is the message number.
The subsystem field (bits 16–31) may contain the following values:
0 The intrinsic executed successfully and there are no
messages.
732 The message in the information field was generated by
the APPC subsystem.
Appendix A , “Messages,” contains a list of all return codes returned by
the APPC subsystem, their causes, and the actions you should take to
resolve any problems.