APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

237

D LU 6.2 API/XL Installation

Guidelines

To run LU 6.2 API/XL on your HP 3000, you must install the product

and conﬁgure both your HP 3000 environment and the remote system

to support LU 6.2 API/XL. HP 3000 conﬁguration is described in

Chapter 4 , “APPC Subsystem Conﬁguration,” of this manual. Remote

system conﬁguration is described in the IBM Host System Programmer

References, listed in the preface of this manual.

This appendix describes the tasks you need to perform to install LU 6.2

API/XL. It also lists the hardware and software required on the

HP 3000 and the remote system in order to run LU 6.2 API/XL.