APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

224 AppendixB
Sample Configuration
Remote Configuration
Remote Configuration
Figure B-37 shows sample lines from an NCP gen that correspond to
values configured on the HP 3000.
Figure B-37 Sample Lines from an NCP Gen
Figure B-38 shows sample lines from an AS/400 configuration that
correspond to values configured on the HP 3000. The lines in Figure
B-38 are from the configuration file on AS/400 #1, in this example
configuration.
*************************************************
*
LN044 LINE ADDRESS=044
*
* This is the LINEID. It isn't configured on the HP 3000.
*
HOSTPU PU ADDR=C1
*
* PU name on the host corresponds to SNA Node Name on the HP 3000.
* (SNA Node Name is configured in the "SNA Node Configuration" screen,
* and the "APPC: Dependent LU Session Type Data" screen.)
*
LU00002 LU LOCADDR=02
LU00003 LU LOCADDR=03
LU00004 LU LOCADDR=04
LU00005 LU LOCADDR=05
*
* LU name on the host (e.g. LU00002) corresponds to LU Name on the
HP 3000.
* (LU names are listed in the "SNA Node Configuration: LU Data" screen
* and in the "APPC: Dependent LU List Data" screen.)
* The LU# field of the "SNA Node Configuration: LU Data" screen
* is a decimal representation of the LOCADDR.
*