APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix B 195
Sample Configuration
HP 3000 Configuration
Figure B-9 shows the “SNA Node Configuration: PU Data” screen for
node AS4001. The Node Type for AS4001 is configured as 2.1, because
the HP 3000 functions as a peer node when it communicates with an
AS/400. Since no dependent LUs will use AS4001, the Node 2.1
Dependent LU Support field is set to N.
The ID BLK and ID NUM fields, together, make up the EXCHID configured
in the Controller Description on the AS/400. (The EXCHID in the
Controller Description, for this example configuration, is 05600001.)
Figure B-9 Example SNANODE PU Data Screen (AS4001)