APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix A 183
Messages
Configuration Messages
ACTION: Go to the Logging Configuration: Logging Classes screen for
SUB0016 and correct the logging class specifications. Valid SUB0016
logging class names are CLAS0010, CLAS0011, CLAS0012, CLAS0013, and
CLAS0014. See the SNA Link/XL Node Manager’s Guide for
information about logging configuration.
35 MESSAGE: Path : LOGGING.SUB0016
“!” is not a correctly formatted User Name. (APPCVALERR 35)
CAUSE: The User Name specified was not in the proper format.
ACTION: See the SNA Link/XL Node Manager’s Guide for information
about logging configuration.
36 MESSAGE: Path : APPC.SESSION.!.LULIST
LU “!” is not a dependent LU under SNANODE.! screen.
(APPCVALERR 36)
CAUSE: The specified dependent LU, which you configured in the
“APPC: Dependent LU List Data” screen, is not configured as a
dependent LU on the SNA node you specified in the “APPC: Dependent
LU Session Type Data” screen.
ACTION: In the “APPC: Dependent LU List Data” screen, list only the
dependent LUs that are configured on the SNA node you will use for the
session type.