APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

178 AppendixA
Messages
Configuration Messages
ACTION: Notify your HP Representative.
7 MESSAGE: No configuration data exists for the APPC subsystem.
(APPCVALWARN 7)
CAUSE: You have attempted to validate the APPC subsystem portion of
the configuration file, but no data has been configured for the APPC
subsystem.
ACTION: Configure the APPC subsystem before validating the
configuration file.
8 MESSAGE: Path : APPC.NETID
Required NETID is not configured. (APPCVALERR 8)
CAUSE: You have attempted to validate the APPC subsystem
configuration without having entered a Local Network ID in the APPC:
Network ID Data screen.
ACTION: Configure your Local Network ID in the APPC: Network ID
Data screen.
9 MESSAGE: Path : APPC.MODE.!
! is an invalid value for Maximum Send RU Size. (APPCVALERR 9)
CAUSE: You have entered a Maximum Send RU Size that is outside the
allowable range.
ACTION: Configure an RU size from 256 through 2048.
10 MESSAGE: Path : APPC.MODE.!
! is an invalid value for Maximum Receive RU Size. (APPCVALERR 10)
CAUSE: You have entered a Maximum Receive RU Size that is outside
the allowable range.
ACTION: Configure an RU size from 256 through 2048.
11 MESSAGE: Path : APPC.MODE
“!” is a reserved name and can not be reconfigured.
(APPCVALERR 11)
CAUSE: You have attempted to configure a mode name that is internally
defined by the APPC subsystem and cannot be reconfigured.
ACTION: Rename the mode type.
12 MESSAGE: Path : APPC.MODE.!
No data is configured for this Mode Type. (APPCVALERR 12)
CAUSE: A mode was configured in the APPC: Select Mode Type screen,
but no data was configured for it in the APPC: Mode Type Data screen.
ACTION: Configure the data for the specified mode type in the APPC:
Mode Type Data screen.