APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

176 AppendixA
Messages
Return Codes
ACTION: Check the status of the subsystem and wait until the
subsystem has completed shutdown. Then, restart your program.
-1201 MESSAGE: Session limit exceeded
CAUSE: The session limit for the APPC subsystem was reached before
the end of the configuration file. Remaining session types are initialized
in the APPC object with a session limit of 0.
ACTION: No action is necessary if you don’t use the session types that
are not initialized. Use the APPCCONTROL SESSIONS command or the
APPCSessions intrinsic to reapportion sessions among the session
types. If necessary, shut down the APPC subsystem and update the
configuration file.
-1202 MESSAGE: CATREAD failed
CAUSE: A non-zero result code was returned from a call to CATREAD.
ACTION: Restart the APPC subsystem. If the problem still exists,
contact your HP representative.