APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix A 165
Messages
Error Messages
1048 MESSAGE: UNABLE TO CREATE CNOS TP AT SUBSYSTEM
STARTUP. (APPCERR 1048)
CAUSE: The APPC subsystem detected an error trying to create the
Change Number of Sessions (CNOS) TP process during subsystem
startup.
ACTION: Verify that the program file CNOSTP.APPC.SYS exists and that
the capabilities and access privileges for the APPC.SYS group and
account are correct. If the problem still exists, contact your
HP representative.
1049 MESSAGE: RESOURCE MANAGER DETECTED ERROR DURING
SUBSYSTEM STARTUP. (APPCERR 1049)
CAUSE: The Resource Manager detected an error during subsystem
startup.
ACTION: Restart the subsystem. If the error still exists, call your
HP representative.
1050 MESSAGE: COPRTP DETECTED ERROR DURING SUBSYSTEM
STARTUP. (APPCERR 1050)
CAUSE: The Control Operator TP detected an error during subsystem
startup.
ACTION: Restart the subsystem. If the error still exists, call your
HP representative.
1051 MESSAGE: CNOSTP DETECTED ERROR DURING SUBSYSTEM
STARTUP. (APPCERR 1051)
CAUSE: The Change Number of Sessions (CNOS) TP detected an error
during subsystem startup.
ACTION: Restart the subsystem. If the error still exists, call your HP
representative.
1060 MESSAGE: RESOURCE MANAGER ERROR — SESSION
DEACTIVATION FAILED. (APPCERR 1060)
CAUSE: The APPC subsystem detected an error while trying to
deactivate a session after the APPCCONTROL SESSIONS command was
issued or the APPCSessions intrinsic was called.
ACTION: Call your HP representative.
1062 MESSAGE: UNABLE TO DUMP APPC TO DUMP FILE.
(APPCERR 1062)
CAUSE: The APPCCONTROL DUMP command did not execute.
ACTION: Retry the command. If the problem still exists, call your
HP representative.