APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix A 151
Messages
Logging Messages
24 MESSAGE: APPC: Remote Attach Failed: TPName=! Creation Failed
(APPCLOG 24).
CAUSE: The APPC subsystem was unable to stream the job to start up
the local TP.
ACTION: Make sure the job name is configured correctly through
NMMGR and that the configured job file exists. Make sure there are no
lockwords on the job file.
25 MESSAGE: APPC: Conversation Started, TCB ID=!, RCB ID=!
(APPCLOG 25).
CAUSE: A conversation has been started on the transaction program
specified by the Transaction Control Block ID (TCB ID), with the
appropriate conversation ID (Resource Control Block ID [RCB ID]).
ACTION: No action required.
26 MESSAGE: APPC: Conversation Stopped, TCB ID=!, RCB ID=!
(APPCLOG 26).
CAUSE: A conversation has been stopped on the transaction program
specified by the Transaction Control Block ID (TCB ID), with the
appropriate conversation ID (Resource Control Block ID [RCB ID]).
ACTION: No action required.
27 MESSAGE: APPC: Conversation Abend, TCB ID=!, RCB ID=!
(APPCLOG 27).
CAUSE: A conversation has been aborted on the transaction program
specified by the Transaction Control Block ID (TCB ID), with the
appropriate conversation ID (Resource Control Block ID [RCB ID]).
ACTION: A conversation has terminated abnormally. Notify the TP
programmer.
28 MESSAGE: APPC: Presentation Services Detected Error, Error=!
(APPCLOG 28).
CAUSE: The APPC module PS (Presentation Services) has detected an
internal error.
ACTION: Give the APPC subsystem internal trace to your HP
representative.
29 MESSAGE: APPC: Object dumped to file ! (APPCLOG 29).
CAUSE: The module COPR (Control Operator) has dumped the APPC
Object to the file specified.
ACTION: This file and the APPC subsystem internal trace file should be
given to your HP representative.