APPC Subsystem on MPE/XL Node Manager's Guide (30294-90007)

Appendix A 147
Messages
Logging Messages
Logging Messages
APPC logging messages are returned during subsystem startup and
while the subsystem is active.
There are five classes of events that can be logged for the APPC
subsystem (SUB0016). They are as follows:
• CLAS0010 records internal errors.
• CLAS0011 records subsystem warnings.
• CLAS0012 records subsystem information messages.
• CLAS0013 records conversation information messages.
• CLAS0014 records session performance statistics.
These messages are returned to the system console, a user terminal, or
a disk file, depending upon what you have configured in the
NMCONFIG file for logging.
0 MESSAGE: APPC: Subsystem Started (APPCLOG 0).
CAUSE: The control operator has completed subsystem startup.
ACTION: No action required.
1 MESSAGE: APPC: Subsystem Stopped (APPCLOG 1).
CAUSE: The subsystem has completely shut down.
ACTION: No action required.
4 MESSAGE: APPC: !
CAUSE: APPC performance data for APPC subsystem. These messages
appear when the APPCCONTROL PERFORMANCE command is issued. See
the description of APPCCONTROL PERFORMANCE for examples.
ACTION: No action required.
5 MESSAGE: APPC: !
CAUSE: APPC performance data for each active session. These
messages appear when the APPCCONTROL PERFORMANCE command is
issued. See the description of APPCCONTROL PERFORMANCE for examples.
ACTION: No action required.
6 MESSAGE: APPC: Session Started, Session ID=! (APPCLOG 6).
CAUSE: An APPC session with the specified Session ID number has
started. This session is now available for use by transaction programs.
ACTION: No action required.