8-port Serial PCI ACC Multiplexer Installation & Service Guide (30291-90508)

Chapter 2 21

Hardware Installation

Anti-Static Precautions

Follow these precautions to prevent damage to the multiplexer:

• Keep the card in or on its anti-static packaging until you install it, or

use a static-free workstation.

• Use a grounding wrist strap when handling the interface card to

channel static charges safely to ground.

• Avoid working on a carpet. Reduce unnecessary movements. These

precautions will help prevent static buildup that might damage the

card.

• Handle the card only by its non-connector edges or faceplate

(bulkhead).

• Store interface cards and device adapters in their original shipping

containers or equivalent anti-static packaging. The storage area

should be clean, dry, and free of corrosive elements.

• After removing the card from the anti-static plastic bag, place it on a

clean, anti-static work surface. (The bag is acceptable for this

purpose if there is not a special work area set aside.)