VISTA Plus for MPE Administrator's Guide

Chapter 5
5-4
Data Col
In this field, enter the data column in the report to display in a window.
When this field is set to 50 and the Length field is set to 20, columns 50
through 70 in the report are displayed in the window. *
Length
In this field, enter the number of characters displayed per line in
a window. *
Screen Col
In this field, enter the column to start a window. When this field is set to
70, Length is set to 10, and Data Col is set to 110, a window will start
in column 70 and display columns 110 through 120 of the report. Hence,
on a terminal which displays only 80 columns at a time, you can now
see the left portion of the report, plus columns 110 through 120 rather
than columns 70 through 80. *
Extract Description
This field displays a flag which controls whether or not a report’s
description will be extracted from the report file. The extraction process
occurs when the report is captured. The extracted description is referred
to as the report description. *
If you set the Extract Description flag to Y, the following fields need to be set.
Page
In this field, enter the page number within the report where the generation
description is located. *
Line
In this field, enter the line number within the page that contains the
generation description. *
Column
In this field, enter the starting column of the generation description. *
Length
In this field, enter the length (in bytes) of the generation description to extract. *
* Not on client.