Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

74 Chapter5
Using NMMGR in Maintenance Mode
Maintenance Mode Commands
Maintenance Mode Commands
Table 5-1 lists the NMMGR maintenance mode commands and the
actions they perform. Each of these commands is described in detail
later in this chapter.
Table 5-1 NMMGR Maintenance Mode Commands
Command Action
:MPECommand Executes MPECommand. MPECommand must be a
programmatically executable MPE command.
ADDCONF Adds subtree of empty records to the configuration file.
ADDLDEV Adds LDEVs to a DTC card.
ADDLU Adds LUs to the SNA node transport screen.
ADDNODE Adds or updates a node in the current network directory.
ADDVC Adds a virtual circuit address key to the network
directory and to the configuration file.
CARDCONF Sets the current DTC card number for the
READALLCONF, READCONF, UPDATECONF, and
WRITECONF commands.
COMPRESSCONF Compresses or expands the current configuration file.
CONTINUE Prevents NMMGR from terminating in a job because of a
maintenance mode error
COPYCONF Copies a configuration subtree.
DELETECONF Deletes a subtree from the current configuration file.
DELETENODE Deletes an entry from the network directory.
EXIT Exits from maintenance mode.
EXITVALIDATE Validates a subsystem’s configuration, if needed, when
exiting from NMMGR.
EXITWARN Warns the user that a subsystem needs to be validated
before exiting NMMGR.
EXPANDDIR Increases the capacity of a network directory file.
HELP Calls up the help function.
LISTDIR Lists the contents of a network directory.
LISTLDEV Lists LDEVs for a DTC card in a format compatible with
ADDLDEV.
LISTLU Lists LUs in a format compatible with ADDLU.