Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 289
NMS Error Messages
ND Error Messages
NDIERR 010 MESSAGE: Path report list length cannot be negative. (NDIERR 010)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 011 MESSAGE: Path report list length > than ND’CREATE maximum.
(NDIERR 011)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 012 MESSAGE: Duplicate node name in directory — cannot add new
entry. (NDIERR 012)
CAUSE: An entry with the same node name and global/local flag setting
already exists in the directory.
ACTION: Supply a different node name and/or global/local setting.
NDIERR 013 MESSAGE: FFINDBYKEY failed — corrupt file likely. (NDIERR 013)
CAUSE: Possible corrupt network directory file.
ACTION: Restore the data and key files from a backup tape. If this fails,
see “Submitting a CR” at the beginning of this appendix.
NDIERR 020 MESSAGE: Directory file not open. (NDIERR 020)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 021 MESSAGE: Cannot close directory file — internal error. (NDIERR 021)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 022 MESSAGE: Requires Node Manager or Network Administrator
capability. (NDIERR 022)
CAUSE: User does not have Node Manager or Network Administrator
capabilities.
ACTION: Change user capabilities.
NDIERR 040 MESSAGE: Directory size too small; must be > 0. (NDIERR 040)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 041 MESSAGE: Directory size too large; must be <= 10,000 records.
(NDIERR 041)
CAUSE: Directory size parameter too large.
ACTION: If a larger file is really desired, create one at the maximum
size, then use NMMGR maintenance mode EXPANDDIR command to