Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

288 AppendixA
NMS Error Messages
ND Error Messages
ND Error Messages
NDIERR messages are produced by errors from the Network Directory
intrinsics. In most cases, they are accompanied by other messages
(NMGRERRs or MPE File System errors). You should take the action
recommended for the accompanying messages first.
NDIERR 001 MESSAGE: Directory file not open. (NDIERR 001)
CAUSE: No directory file was opened.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 002 MESSAGE: Directory is not open for write access. (NDIERR 002)
CAUSE: The currently opened directory was not opened with write
access.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 003 MESSAGE: FLOCK failed — internal error. (NDIERR 003)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 004 MESSAGE: Requires Network Administrator capability. (NDIERR 004)
CAUSE: User does not have network Administrator capabilities.
ACTION: Change user capabilities.
NDIERR 006 MESSAGE: Not enough room in directory for new entry. (NDIERR 006)
CAUSE: The directory file is full.
ACTION: Expand the directory file capacity using the NMMGR
maintenance mode EXPANDDIR command.
NDIERR 007 MESSAGE: FCONTROL/FUNLOCK failed — internal error.
(NDIERR 007)
CAUSE: The directory file is full.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 008 MESSAGE: Name type invalid; must be 1 (NS node name).
(NDIERR 008)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NDIERR 009 MESSAGE: Name length invalid for name type. (NDIERR 009)
CAUSE: This is an internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.