Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 279
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
NMMGRVERERR
26
MESSAGE: Merge failed. Error in NMCONFIG.PUB.SYS
(NMMGRVERR 26)
CAUSE: During the merge of NMCONFIG and the file to be converted,
an error was found in one of the paths in NMCONFIG.
ACTION: The configuration file may have been changed. Restore a
backup copy of the configuration file if possible and run NMMGRVER
again. If the error still occurs, submit a Change Request. See
“Submitting a CR” at the beginning of this appendix.
CAUSE: The file NMCONFIG.PUB.SYS is not valid.
ACTION: The configuration file may be corrupted. Restore a backup
copy of the configuration file if possible and run NMMGRVER again. If
the error still occurs, submit a Change Request. See “Submitting a CR”
at the beginning of this appendix
CAUSE: Depth of paths exceed
max_path_depth .
ACTION: The configuration file may be corrupted. Restore a backup
copy of the configuration file if possible and run NMMGRVER again. If
the error still occurs, submit a Change Request. See “Submitting a CR”
at the beginning of this appendix.
NMMGRVER
WARN 27
MESSAGE: File full; no conversion done. (NMMGRVERWARN 27)
CAUSE: The configuration file to be converted is full. There must be at
least two (and possibly more than two) records available in the
configuration file to do a conversion.
ACTION: Go to the Compress utility screen in NMMGR and expand the
file.
NMMGRVERERR
40
MESSAGE: Cannot copy configuration file to NMTEMP; no conversion
done. (NMMGRVERR 40)
CAUSE: The configuration file could not be copied to NMTEMPa.
ACTION: Check if there is any disk space left on LDEV 1.
NMMGRVERERR
41
MESSAGE: Could not rename config file; no conversion done.
(NMMGRVERR 41)
CAUSE: Could not rename or copy the configuration file to NMMGBAK,
or could not rename or copy NMMGRTMP to the configuration file.
ACTION: Check if there is any disc space left on LDEV 1.
NMMGRVERMSG
56
MESSAGE: File not converted NMMGRVERMSG 56.
CAUSE: You selected the skip option when asked for a file type during
the configuration file conversion.
ACTION: None. This is an informative message.