Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

264 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
number you are trying to access. Make sure you are not trying to use
Vplus field numbers to access the field.
NMGRERR 390 MESSAGE: Path not specified, or path specified does not exist.
(NMGRERR 390)
CAUSE: PATHCONF was not previously issued.
ACTION: Check to see if you set the path with the PATHCONF command.
Check to see if the path that you specified exists in the configuration file
NMGRERR 391 MESSAGE: Version stamp in VERSIONCONF does not match NMMGR
version. (NMGRERR 391)
CAUSE: Version stamp must match NMMGR version.
ACTION: Change the version stamp in your batch file to match the
version displayed on the NMMGR banner line.
NMGRERR 392 MESSAGE: VERSIONCONF must be called before this command may
be called. (NMGRERR 392)
CAUSE: Tried to perform OPENCONF before VERSIONCONF.
ACTION: Call VERSIONCONF with the version stamp which NMMGR
displays on the banner line.
NMGRERR 393 MESSAGE: Missing or invalid destination path name. (NMGRERR 393)
CAUSE: The copyconf command will not operate without a valid
destination path.
ACTION: Check to make sure an NMCONF path name was specified for
the copyconf command.
NMGRERR 394 MESSAGE: Missing or invalid destination file name. (NMGRERR 394)
CAUSE: The copyconf command will not operate without a valid
destination file name.
ACTION: Check to make sure that an MPE file name was specified after
the colon (:) delimiter in the copyconf command.
NMGRERR 395 MESSAGE: Invalid option specified for copyconf command.
(NMGRERR 395)
CAUSE: An option other than KEEP was specified.
ACTION: Retry with valid option.
NMGRERR 400 MESSAGE: Cannot open the nodelist file. (NMGRERR 400)
CAUSE: The nodelist file could not be opened for read/write access.
ACTION: See the accompanying file system error message for
resolution.