Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 251
NMS Error Messages
NMGR Error and Warning Messages
NMGRERR 278 MESSAGE: Missing quote; the IP address must be enclosed in
quotes. (NMGRERR 278)
CAUSE: While using the ADDVC command in maintenance mode, the
user forgot to enter the IP address with either an opening or a closing
quote.
ACTION: Reissue the command with the correct IP address enclosed in
quotes.
NMGRERR 280 MESSAGE: The source path was not found. (NMGRERR 280)
CAUSE: The path to the subtree to copy was not found.
ACTION: Check to make sure you have the correct file and check the
source path spelling.
NMGRERR 281 MESSAGE: The destination path was not found. (NMGRERR 281)
CAUSE: The destination path, which is created by substituting any
destination IDs into the source path, was not accessible. The path in the
file was not an exact match, or the destination path was missing.
ACTION: Check the source and destination path spelling and make sure
you have the correct file.
NMGRERR 282 MESSAGE: The destination path exists. Use the overwrite option to
replace. (NMGRERR 282)
CAUSE: The destination path already exists in the file.
ACTION: Enter “Y” in the overwrite option.
NMGRERR 283 MESSAGE: Source and destination do not map with each other
correctly. (NMGRERR 283)
CAUSE: The source and destination paths must start at the same spot in
the NMMGR schema. Most likely the user attempted to change the
name of an item in the destination of a subtree copy.
ACTION: Check to see if the item that was changed was a select or type
select identifier. If not, that will cause the subcopy to fail.
Check to make sure that any destination type select items, if changed,
were changed to items of the same type (as in LAN to LAN, instead of
LAN to router).
NMGRERR 284 MESSAGE: Internal ERROR in subtree copy. (NMGRERR 284)
CAUSE: Internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMGRERR 285 MESSAGE: A non select screen id was changed in the destination
path. (NMGRERR 285)
CAUSE: Incorrect IDs in the destination path.
ACTION: See “Submitting a CR” at the beginning of this appendix.