Manualshelf

Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

ManualsBrandsHP ManualsSoftwareMPE/iX 7.0 Operating System
231232233234235236237238239240
Appendix A 231
NMS Error Messages
NMGR Error and Warning Messages
NMGRERR 77 MESSAGE: Internal error: Data conversion ptr is out of bounds.
(NMGRERR 77)
CAUSE: This is an internal NMMGR conversion table error.
ACTION: Submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMGRERR 78 MESSAGE: Internal error: Missing description for this screen.
(NMGRERR 78)
CAUSE: This is an NMMGR internal table error. The screen name is not
in an internal conversion table.
ACTION: Submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMGRERR 79 MESSAGE: Internal error: Invalid scr field position from VPLUS.
(NMGRERR 79)
CAUSE: This is an internal NMMGR error. NMMGR cannot properly
locate field data from this screen.
ACTION: Submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMGRERR 80 MESSAGE: Internal error: Data field not on proper unit boundary.
(NMGRERR 80)
CAUSE: This is an internal NMGRR conversion table error.
ACTION: Submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMGRERR 81 MESSAGE: Cannot lock NM configuration file. (NMGRERR 81)
CAUSE: NMMGR was unable to successfully lock the configuration file.
ACTION: Go to the Errors screen and check for any NMERR or FSERR
error messages to determine the specific error. Correct the error and try
again. If necessary, submit a Change Request. See “Submitting a CR” at
the beginning of this appendix.
NMGRERR 82 MESSAGE: Cannot unlock NM configuration file. (NMGRERR 82)
CAUSE: NMMGR was unable to successfully unlock the configuration
file.
ACTION: Go to the Errors screen and check for any NMERR or FSERR
error messages to determine the specific error. Correct the error and try
again. If necessary, submit a Change Request. See “Submitting a CR” at
the beginning of this appendix.
NMGRERR 83 MESSAGE: Press Delete again to confirm deletion. (NMGRERR 83)
CAUSE: The Delete key needs to be pressed twice to accomplish the
deletion.