Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)
228 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
ACTION: Submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMGRERR 49 MESSAGE: Internal error: The root node has parent node.
(NMGRERR 49)
CAUSE: This is an NMMGR internal error. NMMGR is scanning the
configuration file off the boundary.
ACTION: Submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMGRERR 50 MESSAGE: Internal error: The schema has an invalid format.
(NMGRERR 50)
CAUSE: This is an internal NMMGR error. NMMGR cannot locate a
node in an internal table describing the configuration file structure.
ACTION: Submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMGRERR 51 MESSAGE: No screen for this path. (NMGRERR 51)
CAUSE: There is no screen to display that is associated with this path
name. A path exists in the configuration file but is not recognized by
NMMGR.
ACTION: This path is for internal use only. Check the pathname and try
again.
NMGRERR 52 MESSAGE: Internal error: Cannot create version stamps.
(NMGRERR 52)
CAUSE: NMMGR creates version stamps for each subsystem in
configuration file at file creation time, and in some cases at file open
time. This is an internal NMMGR error. NMMGR cannot create version
stamps in the configuration file due to an NMCONF error. Check the
NMCONF error number for detail.
ACTION: Purge this new file and try to recreate it. If an error still
occurs, see “Submitting a CR” at the beginning of this appendix.
NMGRERR 53 MESSAGE: Version mismatch found on specified subsystem. Please
run NMMGRVER. (NMGRERR 53)
CAUSE: NMMGR checks version stamps of each subsystem in the
configuration file at file open time. Version checking results show that
there is configuration data for at least one subsystem in the
configuration file that is not supported by this version of NMMGR.
ACTION: Run the version control program NMMGRVER to update the
file, or open another file, or create a new file.