Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

204 AppendixA
NMS Error Messages
NM Error Messages
NMERR 138 MESSAGE: Unable to find DC/LDM in system I/O tables. (NMERR 138)
CAUSE: The NSLINK ldev was not configured for the link in
NMCONFIG.PUB.SYS when the system was started.
ACTION: Ensure the NSLINK ldev is configured for the link used by NS,
and reboot. More information may be found in the NMLG log file.
NMERR 139 MESSAGE: Unable to find the specified linkname in system I/O tables.
(NMERR 139)
CAUSE: The specified linkname is not configured in the LINK subtree of
the configuration file.
ACTION: Check that the linkname specified to the subsystem has a
matching linkname configured under the LINK configuration subtree.
NMERR 142 MESSAGE: Status request to communication board failed.
(NMERR 142)
CAUSE: Call to procedure TRAN’GETINFO failed. Returned by
NMLINKINFO and LINKCONTROL. Bad software installation.
ACTION: Make sure that the versions of NMS software and port
translator software are compatible. See “Invalid Software Installation”
at the beginning of this appendix.
CAUSE: An internal error occurred.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 146 MESSAGE: User specified buffer inadequate for request.
(NMERR 146)
CAUSE: Caller did not supply a buffer large enough for returned data.
Returned by NMLINKINFO. Bad software installation.
ACTION: Make sure that the versions of NMS software and port
translator software are compatible. See “Invalid Software Installation”
at the beginning of this appendix.
CAUSE: An internal error occurred.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 147 MESSAGE: Link manager buffer area inadequate for request.
(NMERR 147)
CAUSE: Link Manager’s internal buffer is not large enough to handle
this request. Returned by NMLINKINFO. Bad software installation.
ACTION: Make sure that the versions of NMS software and port
translator software are compatible. See “Invalid Software Installation”
at the beginning of this appendix.
CAUSE: An internal error occurred.
ACTION: See “Submitting a CR” at the beginning of this appendix.