Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Chapter 7 155
NMDUMP
Formatting Options
See Table 7-2 for a description of logging options.
Table 7-2 Log Options
Subsystem Option Meaning Description
802.3, 802.5,
FDDI,
100VG-AnyLAN,
100Base-T
1 Linknames Select logging options by Linknames. @ = ALL
2 Excluded
Linknames
Select Linkname to be excluded from logging.
3 Log Classes Error message options (ERRORS, WARNINGS,
INFO, ALL)
4 Set Output
Level
Toggle between Terse and Verbose. Verbose =
Detail report, Terse = Summary.
SDLC, LAP-B,
RJE/BSC
1 Linknames Select logging options by Linknames. @ = ALL
2 Class
Selection
10 = Errors, 12 = Informational, 99 = ALL
NetIPC,
Network Services,
NETXPORT
5 Class
Selection
Show LOG formatter memo with LOG classes
configured within NMMGR.
6 Entity or
Module
Selectspecific entities (NETXPORT) or modules
(NS) to format for logging.
7 Event or PIN Select event (NETXPORT) or PIN (NetIPC, NS)
where error occurred.
NETXPORT Only 8 Port ID or PIN Select a Port ID or PIN in hexadecimal format.
Default = OFF.
9 Display
Summary
Output
Allows a summary report of log entries either in
additions to or instead of the normal formatting
of log entries. Default = OFF.
10 Save or Use
Filter File
Allows saving of the filter option definitions to a
file for later use or using previously saved filter
file. 1= Use filter file, 2= Save filter file.
Link No options