Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Commands
X25SITE
Chapter 4
85
Description
When this command is executed, TermDSM will gather information about all the
connections that are established through the selected link. This informtion is displayed
in the Connectivity List. The connectivity list consists of the header that contains
detailed information about the Link, and a table that lists information about each
connection. The header contains the following information:
• The full system NS node name
• The NS link name
• The full DTC NS node name
• The DTC's IP address
• The Board number in the DTC
The Connectivity table contains the following information about each connection:
• The Virtual Circuit number
• The NS Node name of the remote system (the name may be truncated)
• The X.25 address of the connection, or the string 'PVC' if this is a Private Virtual
Connection
• The type of connection established
Each connection is identified by a Virtual Circut number. This VC number is used in the
STATUS subcommand to specify on which connection the detailed information is to be
displayed.
The following is an example of the data displayed in the X.25 Connectiviy List:
X.25 Connectivity List
System Node Name: SYSTEMA.DOMAIN.ORG
Link Name: X25LINK1
Local IP Address: C 192.10.11.12
DTC Node Name: DTSDTC01.DOMAIN.ORG
Board Number: 2
===========================================================================
Virtual
Port# Remote Node Name X.25 Address/PVC Conn Type
===========================================================================
0001 SYSTEMZ.DOMAIN.O 123456789012345 Level 3.
0002 <POOL> 123456789012346 TCP/IP..
0256 SYSTEMB.DOMAIN.O PVC Level 3.
STATUS
The STATUS subcommand displays detailed information about a selected Virtural
Circuit established through an X.25 card..
Security level: 2.
Syntax
STAT[us]
vcnbr