Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Commands
VC
Chapter 4
76
VC
Obtains status information about a particular VC on an X.25 card.
Security level: 2.
Syntax
V[C] dtcnum,cardnum,vcnum
Parameters
dtcnum
Number of the DTC that contains the X.25 (SNP) card. This is the
number TermDSM associates with this DTC.
cardnum
Number of the X.25 card within the DTC. The cards are numbered
from zero beginning at the bottom of the DTC. (Note that SNP cards
may not be mounted in slot 0 or 1 for DTC 16, and slot 0 for DTC 48.)
vcnum
Number of the VC. There can be up to 256 VCs on a DTC48 or DTC
72MX and up to 32 VCs on a DTC16.
Description
When this subcommand is entered, detailed information about the selected Virtual
Connection for a PAD or X.25 system connection is printed on the terminal. The VC
number can be determined by examining the output from the CONNECT command and
SHOW subcommand for PAD devices and the MULTI command and LIST subcommand
for the X.25 system to system connections. The connection is listed as the LCI (Logical
Connection Id) number in those displays.