Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Commands
R[ESET]
Chapter 4
71
cardnum
Number of the X.25 card within the DTC. The cards are numbered
from zero beginning at the bottom of the DTC. (Note that SNP cards
may not be mounted in slot 0 or 1 for DTC 16, and slot 0 for DTC 48.)
vcnum
Number of the VC on the X.25 card within the DTC. On a DTC 48 or
DTC 72MX, up the 256 VCs are supported. On a DTC 16, up to 32 VCs
are supported. (PAD VCs must be reset using the Ldev option.)
Description
When the subcommand is entered, the specified VC on an X.25 card is reset. Any job or
session running on the VC will be aborted.