Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Messages
Appendix A
107
CAUSE: The user entered an invalid status option for the SNp subcommand of the
TermDSM STatus function.
ACTION: Reenter the subcommand using one of the valid status options, as follows:
1 = Global
2 = Level 2
3 = Level 3
4 = PAD
For example, to obtain information about the status of PAD support on an SNP card
contained in slot 3 of the DTC designated as DTC #1, you would enter the following
subcommand at the status subcommand prompt:
SN 1,3,4
(TDSM 611) MESSAGE: The X25 status option is missing or invalid. X.25 status options range from
1 to 4. (TDSM 611)
CAUSE: The user failed to enter a valid status option for the SNp subcommand of the
TermDSM STatus function.
ACTION: Reenter the subcommand using one of the valid status options, as follows:
1 = Global
2 = Level 2
3 = Level 3
4 = PAD
For example, to obtain information about the status of PAD support on an SNP card
contained in slot 3 of the DTC designated as DTC #1, you would enter the following
subcommand at the status subcommand prompt:
SN 1,3,4
(TDSM 612) MESSAGE: You have entered a bad X25 trace option. X25 trace options range from 1 to
3. (TDSM 612)
CAUSE: The user entered an invalid trace option for the TermDSM TRACEON function.
ACTION: Reenter the command using one of the valid trace options, as follows:
1 = VC
2 = Level 2
3 = Level 3
For example, to turn on a level 2 trace for an SNP card contained in slot 3 of the DTC
designated as DTC #1, you would enter the following:
TRACEON 1,3,2
(TDSM 613) MESSAGE: The X25 trace option is missing or invalid. X25 trace options range from 1
to 3. (TDSM 613)
CAUSE: The user failed to enter a valid trace option for the TermDSM TRACEON function.
ACTION: Reenter the command using one of the valid trace options, as follows:
1 = VC