Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Messages
Appendix A
104
ACTION: Verify the DTC number on the TermDSM command. Make sure the DTC is a
not a DTC 72MX, DTC 16iX, or DTC 16MX.
(TDSM 400) MESSAGE: The DTC returned an NMP error code of !. (TDSM 400)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 401) MESSAGE: The DTC reported an NMP version mismatch. (TDSM 401)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 402) MESSAGE: The DTC reported an NMP token error or unknown VC number during
DUMP. (TDSM 402)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 403) MESSAGE: The DTC reported an NMP bad port. (TDSM 403)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 404) MESSAGE: The DTC reported an NMP loopback aborted. (TDSM 404)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 405) MESSAGE: The DTC reported an NMP loopback modem error. (TDSM 405)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 406) MESSAGE: The DTC reported an NMP loopback time out. (TDSM 406)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 407) MESSAGE: The DTC reported an UNKNOWN VC number. (TDSM 407)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 450) MESSAGE: The DTC returned an RMP error code of !. (TDSM 450)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 451) MESSAGE: The DTC reported an RMP version mismatch. (TDSM 451)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 452) MESSAGE: The DTC reported an RMP token error. (TDSM 452)
CAUSE: Internal error.
ACTION: Contact your HP support representative.