Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

124 Appendix A
TermDSM Messages
MESSAGE: You have entered a bad X25 trace option. X25 trace
options range from 1 to 3. (TDSM 612)
(TDSM 612) CAUSE: The user entered an invalid trace option for the TermDSM
TRACEON function.
ACTION: Reenter the command using one of the valid trace options, as
follows:
1 = VC
2 = Level 2
3 = Level 3
For example, to turn on a level 2 trace for an SNP card contained in
slot 3 of the DTC designated as DTC #1, you would enter the following:
TRACEON 1,3,2
MESSAGE: The X25 trace option is missing or invalid. X25 trace
options range from 1 to 3. (TDSM 613)
(TDSM 613) CAUSE: The user failed to enter a valid trace option for the TermDSM
TRACEON function.
ACTION: Reenter the command using one of the valid trace options, as
follows:
1 = VC
2 = Level 2
3 = Level 3
For example, to turn on a level 2 trace for an SNP card contained in
slot 3 of the DTC designated as DTC #1, you would enter the following:
TRACEON 1,3,2
MESSAGE: You have entered a bad linkname. X25 linkname may be
up to 8 ASCII characters. (TDSM 614)
(TDSM 614) CAUSE: During execution of the TRACEON function, the user entered an
invalid linkname.
ACTION: Enter a valid linkname for the trace file. This is the linkname
as configured in NMMGR and can be up to 8 ASCII characters.
MESSAGE: The X25 linkname is missing or invalid. X25 linkname may
be up to 8 ASCII characters. (TDSM 615)
(TDSM 615) CAUSE: During execution of the TRACEON function, the user failed to
enter a valid X.25 linkname.
ACTION: Enter a valid file name for the trace file. The file name can be
up to 8 alphanumberic characters and must start with a letter.