System Startup, Configuration, and Shutdown Reference Manual (32650-90907)

Chapter 3
System Startup Functions
Dumping System Memory and Secondary Storage
83
Begin dump of Processor Internal Memory.
Processor Internal Memory dump complete.
Begin dump of main memory.
177 Megabytes of main memory will be dumped
................................................................
Dump of memory save area complete.
................................................
................................................................
Main memory dump complete.
Begin dump of secondary storage for ldev1
adding permanent file to dump
adding permanent file to dump
99 Megabytes of transient objects will be dumped for this device
.............................................................................
.......................
Secondary storage dump for ldev1 complete.
Dump completed - autoboot in progress.
ISL>
CAUTION If your system has failed with a HPMC it is recommended that a system reset (RS
command) be executed prior to restarting the system.
3. Start the system. Enter the START command at the ISL prompt
ISL> START
and any desired options.
Examples 3-5 and 3-6 and Appendix B, “Startup, Dump, and Shutdown Listings,” list the messages
received at the console during a START.
ISL Summary
There are various options available with each utility, as shown below. These options may be entered in any
order and must be separated by a blank or a semicolon. Keywords must be entered as shown.
START [;GROUP=cgn] [;LOGON=acct] [{ ;RECOVERY
;NORECOVERY }]