System Startup, Configuration, and Shutdown Reference Manual (32650-90907)

Chapter 3
System Startup Functions
Dumping System Memory and Secondary Storage
82
ISL Revision A.00.43 Apr 12, 2000
ISL> dump
MPE/iX launch facility
Scanning PCI BUS 0 ++*..++..........................
Scanning PCI BUS 8 ................................
Scanning PCI BUS 10 *................................
Scanning PCI BUS 20 *................................
Scanning PCI BUS 28 +...............................
Scanning PCI BUS 40 ................................
Scanning PCI BUS 50 ................................
Scanning PCI BUS 60 *................................
Scanning PCI BUS 80 ................................
Scanning PCI BUS 90 ................................
Scanning PCI BUS A0 ................................
Scanning PCI BUS C0 +...............................
Scanning PCI BUS D0 ................................
Scanning PCI BUS E0 ................................
MPE/XL Dump Version A.05.16 - initialization
A subset main memory and system volume set dump was requested.
Enter user identification string for this dump (80 chars or less):
Initialize_genesis - Ver bld1: <<pci 2.1601>>
FRI, JAN 18, 2002, 5:03:40 PM (y/n)?
Initialize_genesis = Ready to configure I/O
[CDM]8 8 0 18
Initialize memory manager completed.
MPE/XL Dump Facility Version A.05.16
Performing dump to tape.
adding permanent file to dump
adding permanent file to dump
Determine pre-compression size of secondary storage for ldev1
99 Megabytes of transient objects will be dumped for this device
Tape compression enabled.
6250 BPI not supported on this tape drive
1600 BPI density set on tape drive
tape is ready