System Startup, Configuration, and Shutdown Reference Manual (32650-90907)

Chapter 3
System Startup Functions
Starting the System
63
The path 0/0/1/0.8.0 was configured but is not available.
The path 0/0/1/0.9.0 was configured but is not available.
The path 0/12/0/0.2.0 was configured but is not available.
The path 0/12/0/1.2.0 was configured but is not available.
The path 0/2/0/1.2.0 was configured but is not available.
The path 0/4/0/1.2.0 was configured but is not available.
Leaving - System I/O configuration.
SYSTEM I/O AT BOOT TIME
ldev: 1 HPC2490WD configured available 0/0/2/0.6.0
ldev: 6 HP5000/F100 configured not-available 0/0/1/0.8.0
ldev: 7 HPC1537A configured not-available 0/12/0/0.2.0
ldev: 8 HPC1537A configured not-available 0/12/0/1.2.0
ldev: 10 HP7978A configured not-available 0/0/1/0.9.0
ldev: 19 HP2688A configured not-available 0/0/1/0.10.0
ldev: 20 configured available
ldev: 31 HPC1537A configured not-available 0/2/0/1.2.0
ldev: 32 HPC1537A configured not-available 0/4/0/0.2.0
ldev: 33 HPC1537A configured not-available 0/4/0/1.2.0
MEMORY AVAILABLE FOR USE (bytes): 2147483648
Entering - Mount all volumes
Mounting MASTER on LDEV 1
USERLOG RECOVERY COMPLETED for MPEXL_SYSTEM_VOLUME_SET
NO PARALLEL PROCESSES FOR MOUNT_ALL_VOLUMES
-- Time spent in MOUNT_ALL_VOLUMES -> 0
Leaving - Mount all volumes
The current boot command has been saved on the system master.
NMLG FILE NUMBER 82 ON.
11:20/22/DCC STARTUP - ENTER - version C0500001 compiled 000612
11:20/22/ WARNING: I/O config from last START NORECOVERY will be used. (DCCWARN=10
0)
[LAN_DUMP_SURR] Version A.00.70.000, PIN: #30
[PSI_DUMP_SURR] Version A.00.70.000, PIN: #n 3
[PBT_DUMP_SURR] Version A.00.70.066, PIN: #32
[ACC_DUMP_SURR] Version A.00.70.003, PIN: #33
System State: Initializing Mode.
Reply Information Table has been initialized!
System State: Multiuser Mode.
11:20/1/Spooling of initially spooled devices is complete.
11:20/1/Set-up of Spooling Subsystem is complete.