System Startup, Configuration, and Shutdown Reference Manual (32650-90907)

Appendix B
Startup, Dump, and Shutdown Listings
Shutdown Sequence
190
Shutdown Sequence
This sequence, unlike the previous four, begins at the MPE prompt. (Presumably, the system is up and
running before it is shut down.) Refer to Chapter 9, “Halting System Activity,” for information on the steps
involved in shutting down the system.
The following represents a shutdown sequence for the N-Class systems received at the console. Sequences
from other installations may vary.
:TELL @S;SHUTDOWN IN 15 MINUTES. PLEASE LOG OFF.
:LIMIT 0,0
:JOBFENCE 14
:SHOWOUT SP
NO SUCH FILE(S)
:WARN @S;SYSTEM SHUTDOWN IN 2 MINUTES. PLEASE LOG OFF.
:SHOWJOB JOB=@S
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S669 EXEC 20 20 WED 8:22A OPERATOR.SYS
1 JOBS (DISPLAYED)
0 INTRO
0 WAIT; INCL 0 DEFERRED
1 EXEC; INCL 1 SESSIONS
0 SUSP
JOBFENCE= 14; JLIMIT=0; SLIMIT=0
:WARN @S;SYSTEM SHUTDOWN IN 1 MINUTE. ALL USERS WILL&
BE LOGGED OFF AT THAT TIME.
:
CTRL A
=SHUTDOWN
Shutdown of operating system begins. (Shut 1)
Shutdown of user processes begins. (Shut 2)
Shutdown of jobs & sessions begins. (Shut 3)
Spoolers notified of a shutdown. (Shut 16)
13:11/39/Output spooler, LDEV #6: Cannot open physical device.
13:11/39/Output spooler, LDEV #6: Stopped.
13:11/38/The Spooling system has been shutdown.
Shutdown of system processes begins. (Shut 4)
ShutShutdown of operating system complete. (Shut 6)