System Startup, Configuration, and Shutdown Reference Manual (32650-90907)

Chapter 8
Modifying System File Configurations
Entering the SYSFILE Configurator
158
Example 8-5 SYSFILE Configurator SHOW ALL Output
sysfile>SHOW ALL
DISC AUTOBOOT = NONE
TAPE AUTOBOOT = NONE
SYSTEM CATALOG = CATALOG.PUB.SYS
CM SL = SL.PUB.SYS
NMCONFIG FILE = NONE
NM LIB = NL.PUB.SYS
BOOT FILE FILENAME TYPE
--------- -------- ----
ISL.MPEXL.SYS ISL.MPEXL.SYS disc boot
DUMP.MPEXL.SYS DUMP.MPEXL.SYS disc boot
START.MPEXL.SYS START.MPEXL.SYS disc boot
INSTALL.MPEXL.SYS INSTALL.MPEXL.SYS tape boot
UPDATE.MPEXL.SYS UPDATE.MPEXL.SYS tape boot
A1002AI.MPEXL.SYS A1002AI.MPEXL.SYS both boot
A1002AM.MPEXL.SYS A1002AM.MPEXL.SYS both boot
A1002AP.MPEXL.SYS A1002AP.MPEXL.SYS both boot
A1100AI.MPEXL.SYS A1100AI.MPEXL.SYS both boot
A1100AM.MPEXL.SYS A1100AM.MPEXL.SYS both boot
A1100AP.MPEXL.SYS A1100AP.MPEXL.SYS both boot
CAEXR.MPEXL.SYS CAEXR.MPEXL.SYS both boot
IOMAP.MPEXL.SYS IOMAP.MPEXL.SYS both boot
CLKUTIL.MPEXL.SYS CLKUTIL.MPEXL.SYS both boot
DISCUTIL.MPEXL.SYS DISCUTIL.MPEXL.SYS both boot
SADPATCH.MPEXL.SYS SADPATCH.MPEXL.SYS both boot
SAT.MPEXL.SYS SAT.MPEXL.SYS both boot
MPROC.MPEXL.SYS MPROC.MPEXL.SYS both boot
UNIPROC.MPEXL.SYS UNIPROC.MPEXL.SYS both boot
MDIAG.MPEXL.SYS MDIAG.MPEXL.SYS both boot
TDIAG.MPEXL.SYS TDIAG.MPEXL.SYS both boot
EDBC.MPEXL.SYS EDBC.MPEXL.SYS both boot
EDPROC.MPEXL.SYS EDPROC.MPEXL.SYS both boot
IPL FILE FILENAME TYPE
--------- -------- ----
ISL2.MPEXL.SYS ISL2.MPEXL.SYS tape ipl
MMSAVE.MPEXL.SYS MMSAVE.MPEXL.SYS disc ipl
SYSTEM PROGRAM FILENAME TYPE
-------------- -------- ----
IFHPIBFS.PUB.SYS IFHPIBFS.PUB.SYS system prog
XL.PUB.SYS XL.PUB.SYS system prog
PSIMDBDL.DIAG.SYS PSIMDBDL.DIAG.SYS system prog
PSINIODL.DIAG.SYS PSINIODL.DIAG.SYS system prog
SYSDIAG.PUB.SYS SYSDIAG.PUB.SYS system prog
. . .
. . .
DTCSWI04.PUB.SYS DTCSWI04.PUB.SYS system prog
DTCSWJ04.PUB.SYS DTCSWJ04.PUB.SYS system prog
DTCSWK04.PUB.SYS DTCSWK04.PUB.SYS system prog
DTCSWL04.PUB.SYS DTCSWL04.PUB.SYS system prog
DTCSWM04.PUB.SYS DTCSWM04.PUB.SYS system prog
The add commands (AAUTO, ABOOT, ACMSL, and ASPROG) add objects to the list of files dumped onto SYSGEN’s
tape:
AAUTO adds an autoboot file to the list of files.
ABOOT adds a boot image to the list of files.
ACMSL adds a segment to a temporary copy of the CMSL, which SYSGEN automatically manages.
ASPROG adds a system program or other file to the list of files.