System Startup, Configuration, and Shutdown Reference Manual (32650-90907)

Chapter 8
Modifying System File Configurations
Entering the SYSFILE Configurator
154
Entering the SYSFILE Configurator
Example 8-1 demonstrates activating the SYSFILE configurator. To access the SYSFILE configurator, enter
the SYSFILE command (abbreviated SY) at the SYSGEN prompt:
Example 8-1 Activating the SYSFILE Configurator
sysgen>SY
** SYSFILE configurator commands **
aauto (aa) aboot (ab) acmsl (ac) asprog (as)
cmsl (cm) dauto (da) dboot (db) dcmsl (dc)
dsprog (ds) lcmsl (lc) rauto (ra) rboot (rb)
rcat (rc) rcmsl (rcm) rdcc (rd) ripl (ri)
rnmlib (rn) rsprog (rs) show (sh)
clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho)
For additional information on entering the SYSFILE configurator, refer to Chapter 4, “Using the System
Generator (SYSGEN).”
Using the SYSFILE Configurator Help Facility
The help facility enables you to identify quickly the function and syntax of SYSFILE configurator commands
and options.
The help facility operates similarly to the global help facility. Example 8-2 demonstrates using the SYSFILE
configurator's help facility to list all available SYSFILE commands. To obtain the list of commands, enter
HELP at the SYSFILE configurator prompt:
Example 8-2 SYSFILE Configurator HELP
sysfile>HELP
** SYSFILE configurator commands **
aauto (aa) aboot (ab) acmsl (ac) asprog (as)
cmsl (cm) dauto (da) dboot (db) dcmsl (dc)
dsprog (ds) lcmsl (lc) rauto (ra) rboot (rb)
rcat (rc) rcmsl (rcm) rdcc (rd) ripl (ri)
rnmlib (rn) rsprog (rs) show (sh)
clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho)
Example 8-3 demonstrates using the SYSFILE configurator's help facility for listing all SYSFILE commands
and their syntax. To display the syntax for each available command at the current level, enter HELP ALL.
Example 8-3 SYSFILE Configurator HELP ALL
sysfile>HELP ALL
commands (abb) parameter=value
-------------- ---------------
aauto (aa) file = filename
type = DISC|TAPE|BOTH
aboot (ab) image = boot image name
file = filename
type = DISC|TAPE|BOTH
acmsl (ac) seg = segment-name