System Startup, Configuration, and Shutdown Reference Manual (32650-90892)

92 Chapter3
System Startup Functions
Dumping System Memory and Secondary Storage
adding permanent file to dump
adding permanent file to dump
99 Megabytes of transient objects will be dumped for this device
.............................................................................
.......................
Secondary storage dump for ldev1 complete.
Dump completed - autoboot in progress.
ISL>
CAUTION If your system has failed with a HPMC it is recommended that a system reset
(RS command) be executed prior to restarting the system.
3. Start the system. Enter the START command at the ISL prompt
ISL> START
and any desired options.
Examples 3-5 and 3-6 and Appendix B , “Startup, Dump, and Shutdown Listings,” list
the messages received at the console during a START.
ISL Summary
There are various options available with each utility, as shown below. These options may
be entered in any order and must be separated by a blank or a semicolon. Keywords must
be entered as shown.
START [;GROUP=
cgn ] [;LOGON= acct ] [{ ;RECOVERY
;NORECOVERY }]
[{ ;SINGLE-DISC [{ ;SINGLE-USER
;MULTI-DISC }] ;MULTI-USER }]
[{ ;SYSSTART
;NOSYSSTART }]
When the START option of the UPDATE utility is selected, the remaining options are
available.
UPDATE [{ ;CONFIG [{ ;START;
;NOCONFIG }] ;NOSTART } [options] ]
where options are: [;LOGON=
acct ][GROUP= cgn ]