System Startup, Configuration, and Shutdown Reference Manual (32650-90892)

70 Chapter3
System Startup Functions
Starting the System
Leaving - Mount all volumes
The current boot command has been saved on the system master.
NMLG FILE NUMBER 82 ON.
11:20/22/DCC STARTUP - ENTER - version C0500001 compiled 000612
11:20/22/ WARNING: I/O config from last START NORECOVERY will be used.
(DCCWARN=10
0)
[LAN_DUMP_SURR] Version A.00.70.000, PIN: #30
[PSI_DUMP_SURR] Version A.00.70.000, PIN: #n 3
[PBT_DUMP_SURR] Version A.00.70.066, PIN: #32
[ACC_DUMP_SURR] Version A.00.70.003, PIN: #33
System State: Initializing Mode.
Reply Information Table has been initialized!
System State: Multiuser Mode.
11:20/1/Spooling of initially spooled devices is complete.
11:20/1/Set-up of Spooling Subsystem is complete.
11:20/37/The system has finished rebuilding the output spoolfile directory.
SYSTEM LOG FILE #83 IS ON
Initializing Job & Session
SESSION Scheduling Initialized
JOB Scheduling Initialized
Did not find a keyword in the first record of the SYSSTART file.
Initiate Operator Log On
MPE/iX:Successfully launched diagnostic monitor process.
Successfully launched System UPS Monitor process.
STM system manager started
MPE/iX:
Example 3-6. Example of a Soft Reset on an N-Class System
GSP Host Name: csyprel18(csysas18)
GSP> tc
TC
Execution of this command irrecoverably halts all system processing and