System Startup, Configuration, and Shutdown Reference Manual (32650-90892)

Chapter 3 69
System Startup Functions
Starting the System
Begin launching additional processors:
No additional processors found: 1 total processor.
Entering - System I/O configuration.
The path 0/0/1/0.10.0 was configured but is not available.
The path 0/0/1/0.8.0 was configured but is not available.
The path 0/0/1/0.9.0 was configured but is not available.
The path 0/12/0/0.2.0 was configured but is not available.
The path 0/12/0/1.2.0 was configured but is not available.
The path 0/2/0/1.2.0 was configured but is not available.
The path 0/4/0/1.2.0 was configured but is not available.
Leaving - System I/O configuration.
SYSTEM I/O AT BOOT TIME
ldev: 1 HPC2490WD configured available 0/0/2/0.6.0
ldev: 6 HP5000/F100 configured not-available 0/0/1/0.8.0
ldev: 7 HPC1537A configured not-available 0/12/0/0.2.0
ldev: 8 HPC1537A configured not-available 0/12/0/1.2.0
ldev: 10 HP7978A configured not-available 0/0/1/0.9.0
ldev: 19 HP2688A configured not-available 0/0/1/0.10.0
ldev: 20 configured available
ldev: 31 HPC1537A configured not-available 0/2/0/1.2.0
ldev: 32 HPC1537A configured not-available 0/4/0/0.2.0
ldev: 33 HPC1537A configured not-available 0/4/0/1.2.0
MEMORY AVAILABLE FOR USE (bytes): 2147483648
Entering - Mount all volumes
Mounting MASTER on LDEV 1
USERLOG RECOVERY COMPLETED for MPEXL_SYSTEM_VOLUME_SET
NO PARALLEL PROCESSES FOR MOUNT_ALL_VOLUMES
-- Time spent in MOUNT_ALL_VOLUMES -> 0