System Startup, Configuration, and Shutdown Reference Manual (32650-90892)

16
• Appendix B , “Startup, Dump, and Shutdown Listings,” lists the console messages you
will see during a successful startup, load, dump and shutdown of the system.
• Appendix C , “Reading Stable Storage and Nonvolatile Memory,” explains how to use
the READSS and READNVM commands to provide information to your Customer Engineer
in case of system problems.
• Appendix D , “Default Configurations Used by INSTALL and UPDATE,” explains
default configuration groups.
• Appendix E , “Verifying Attached Devices,” explains two ISL utitilities, IOMAP and ODE.
• Appendix F, “Adding Peripherals to a System,” explains how to define device paths for
peripherals connected to a system via several different kinds of device adapters.
• Appendix G , “UPS and UPS Monitor/iX Software,” explains the new method of power
failure protection available on HP e3000 systems.
The Glossary defines the important terms introduced in system management. The Index
is an alphabetical listing of subjects, cross-referenced with their location in the manual.
This manual contains information subject to change without notice.