STORE and TurboSTORE/iX Products Manual (B5151-90003)

154 Chapter10
Backing Up the System Configuration
Creating a System Load Tape
Otherwise, recall the original CONFIG.SYS and store it under a different group name:
sysgen>BASEGROUP CONFIG
or
sysgen>BA CONFIG
sysgen>KEEP OLDFIG
sysgen>
sysgen>EXIT
END OF SUBSYSTEM
:
If the system does not boot under the new CONFIG group, you can use the START
GROUP=OLDFIG option under the initial system loader (ISL) to boot the system under the
original CONFIG group. For more information on the ISL START command and options, refer
to System Startup, Configuration, and Shutdown Reference Manual.