SNA NRJE User/Programmer Reference Manual (30292-90006)

Chapter 2 49
Getting Started
NRJE Shutdown
LU03 * 99 3 YES
LU04 * 99 4 YES
LU05 99 0 NO
LU06 99 0 NO
LU07 99 0 NO
LU08 99 0 NO
* = The LU is active.
Now jobs that have been submitted are
transmitted. Data sets can be received.
Console commands can be sent.
Console messages can be received.
Identify the status of all sessions, PU-SSCP,
LU-SSCP, LU-LU.<F100P12D>
R20>:snacontrol status;node= ibmnode
SNACONTROL commands can be entered from your
configured NRJE prompt by preceding them with
colon ( : ).
For MPE V systems, the following displays:
PU - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 1 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 1 - LU 1 STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 2 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 2 - LU 1 STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 3 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 3 - LU 1 STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 4 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 4 - LU 1 STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 5 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 6 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 7 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
LU 8 - SSCP STATE: ACTIVE TRACE OFF USER: MANAGER.SYS
For MPE XL systems, the following displays:
SESSION ID STATE TRACE USER
----------------------------------------------------
PU - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 1 - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 2 - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 3 - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 4 - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 5 - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 6 - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 7 - SSCP SESS_ACTIVE OFF MANAGER.SYS
LU 8 - SSCP SESS_ACTIVE OFF MANAGER.SYS