SNA NRJE User/Programmer Reference Manual (30292-90006)

Chapter 2 45

Getting Started

NRJE Startup

Later in this chapter, an example illustrates how to start and stop

NRJE. To start NRJE, you must do the following:

• Activate the data communications line and host PU and LUs.

• Start the SNA node using an MPE SNACONTROL START command.

• Start the NRJE workstation using an MPE NRJECONTROL START

command or an NRJE STARTWS command.

NOTE

A job stream ﬁle must exist before you start a workstation.

An MPE job stream ﬁle is required to start each workstation. The job

stream starts NRJEMON, which is the father communication process

for an NRJE workstation. The structure of the job stream ﬁle and the

STARTWS command are described in the SNA NRJE Node Manager’s

Guide. SNACONTROL START is described in the SNA Link Services

Reference Manual or the SNA Link/XL Node Manager’s Guide. The

MPE command NRJECONTROL START is also described in the SNA NRJE

Node Manager’s Guide.