SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 95
Commands
NRJECONTROL TRACEOFF
NRJECONTROL TRACEOFF
Turns off intrinsic and/or LU tracing for a workstation.
Syntax
NRJECONTROL TRACEOF[F];W[SID]= Wsid [;TRACE= Type [, Type ]]
Parameters
Wsid Required. The workstation name. This can be up to
eight alphanumeric characters long; the first letter
must be alphabetic.
The workstation must have been configured.
Type The type of trace to be stopped:
• LU: for NRJE LU procedures.
• INTRINSIC: for commands and intrinsics accessed
by NRJE workstation users and operators.
If you omit this parameter, all tracing that is on is
turned off.
Description
This command is used to turn off intrinsic and/or LU tracing for all
active LU-LU sessions of a workstation. Tracing is described in Chapter
5 , “SNA NRJE Troubleshooting,” of this manual.
Text Reference
See TRACEOFF later in this chapter. NRJETrace is the manager intrinsic
counterpart of this command; it is described in the SNA NRJE
User/Programmer Reference Manual.