SNA NRJE Node Managers Guide (30292-90007)

36 Chapter3
SNA NRJE Configuration
Configuring SNA NRJE
Fields
Path
For display only. The NMMGR path for this screen. It
includes the name of the NRJE workstation you are
configuring.
SNAnode Name
Required. The name of the SNA node the workstation
is to use.
Host Configuration: For troubleshooting purposes,
we strongly recommend that this match the
puname
operand of the PU macro that defines this node on the
host (VTAM); see Table 3-1.
Remote Node Number
Required. This identifies the workstation to the host.
Host Configuration:
• JES2: This must match the RMT
nnnn macro for the
SNA node this workstation is to use; see Table 3-4.
• JES3: This must match the N parameter of the
RJPWS macro, the
JNAME parameter of the CONSOLE
macro, and the
JNAME parameter of the DEVICE
macro; see Table 3-6.
• VSE/POWER: This must match the REMOTE
parameter of the PRMT macro; see Table 3-7.
Line Password
The password for the supported host job entry
subsystem.
Default: Blank (no password)
Host Configuration:
• JES2: This must match the
PASSWORD parameter of
the LINE
nnn macro; see Table 3-4.
• JES3: This must match the
P parameter of the
RJPWS macro; see Table 3-6.
• VSE/POWER: This must match the PSWRD
parameter of the PRMT macro; see Table 3-7.
Logmode Identifier
An entry in the Logmode Table. This can be up to eight
alphanumeric characters long; the first character must
be alphabetic.