SNA NRJE Node Managers Guide (30292-90007)

Appendix A 243
Result Codes and Messages
SNA NRJE Logging Messages
9069 MESSAGE: NRJE(!:!): NRJE HAS PASSED AN ENTIRE PRINT
DATASET TO A USER EXIT PROCEDURE (LU=9069)
CAUSE: Advisory message only. An exit procedure did not return either
JOBNUMBER or FILENUMBER to NRJE causing NRJE to pass the entire
dataset to the exit procedure. It is presumed that the exit procedure has
routed the dataset to the proper destination.
ACTION: None.
9070 MESSAGE: NRJE(!:!): NRJE HAS PASSED AN ENTIRE PUNCH
DATASET TO A USER EXIT PROCEDURE (LU=9070)
CAUSE: Advisory message only. An exit procedure did not return either
JOBNUMBER or FILENUMBER to NRJE causing NRJE to pass the entire
dataset to the exit procedure. It is presumed that the exit procedure has
routed the dataset to the proper destination.
ACTION: None.
9071 MESSAGE: NRJE(!:!): CONSOLE EXIT PROCEDURE ‘!’ LOADED.
(LU=9071)
CAUSE:
ACTION:
9072 MESSAGE: NRJE(!:!): FOPEN FAILURE: ‘!.’ (LU=9072)
CAUSE:
ACTION:
9073 MESSAGE: NRJE(!:!): PDIR: HEAD=HEX‘!’. ! (FMD=9073)
CAUSE: A PDIR record was received. The first four bytes are displayed
in hexadecimal, the remainder in ASCII.
ACTION:
9074 MESSAGE: NRJE(!:!): LU ABNORMAL TERMINATION. STACK
DUMPED TO STDLIST. (LU=9074)
CAUSE:
ACTION: Print STDLIST output and contact your HP representative.
9075 MESSAGE: NRJE(!:!): FMD IS RECEIVING OUTPUT FOR JOB ! ON !.
(FMD=9075)
CAUSE:
ACTION:
9076 MESSAGE: NRJE(!:!): FMD HAS FINISHED RECEIVING OUTPUT; CPU
TIME= !; WALL TIME= !. (FMD=9076)
CAUSE: The indicated CPU time is in milliseconds.
ACTION: