SNA NRJE Node Managers Guide (30292-90007)

Appendix A 239
Result Codes and Messages
SNA NRJE Logging Messages
ACTION: Check NRJE versions. Ensure that NRJEMON and NRJELU
versions are compatible. Contact Hewlett-Packard.
9049 MESSAGE: NRJE(!:!): FILE SYSTEM ERROR OCCURRED ON ‘!’: ‘!.’
(LU=9049)
CAUSE: As above.
ACTION: Depends upon the nature of the failure. Refer to other
messages logged immediately prior to and after this message for
corrective action.
9050 MESSAGE: NRJE(!:!): COULD NOT ROUTE OUTPUT AS REQUESTED
FOR JOB NAME = !. ALTERNATE DESTINATION OF ‘!’ REQUESTED
BY USER ‘!’. OUTPUT ROUTED TO DEFAULT DESTINATION, OUTPUT
PRIORITY = 2. (LU=9050)
CAUSE: A user specified an output routing option in the SUBMIT
command but NRJE was unable to route the output as requested. The
output was routed to the default destination specified in the writer data
screen using an output priority of 2.
ACTION: Contact the affected user.
9051 MESSAGE: NRJE(!:!): FAILURE TO EXECUTE FERRMSG INTRINSIC
USING FILE SYSTEM ERROR CODE = !. (LU=9051)
CAUSE: As above. Internal software error.
ACTION: Contact Hewlett-Packard.
9052 MESSAGE: NRJE(!:!): FILE SYSTEM ERROR ON ‘!’ ! FOR HOST JOB
NUMBER: !. (LU=9052)
CAUSE: The indicated error occurred while attempting to route a user’s
dataset to the proper destination.
ACTION: Contact the affected user.
9053 MESSAGE: NRJE(!:!): FORMID NOT FOUND IN LOOKUP TABLE.
FORM ‘!’ WAS REQUESTED BY JOB NUMBER ! (JOB NAME= !).
COULD NOT ROUTE OUTPUT AS REQUESTED. (LU=9053)
CAUSE: A user specified a form name which could not be found in the
Lookup Table.
ACTION: Contact the affected user. Ensure that all users are informed
of all form names supported by the workstation.
9054 MESSAGE: NRJE(!:!): FAILED TO OPEN OUTPUT FILE. ‘!.’ HOST JOB
NUMBER = !. (LU=9054)
CAUSE: A File System error occurred while attempting to open an
output file for a user’s dataset. Output will be routed to the default
destination with an output priority of 2.
ACTION: Contact the affected user.