SNA NRJE Node Managers Guide (30292-90007)

Appendix A 233
Result Codes and Messages
SNA NRJE Logging Messages
9008 MESSAGE: NRJE(!:!): FAILED TO WRITE TO NRJE XDS (XDS=!)
(LU=9008)
CAUSE: NRJE could not zero out the length field for the Joblog record in
the NRJE XDS. Internal software error.
ACTION: Contact Hewlett-Packard.
9009 MESSAGE: NRJE(!:!): READ ERROR ON SUBMITTED SPOOLFILE
(SPOOLER=!) (LU=9009)
CAUSE: NRJE encountered an error while attempting to copy a file from
the NRJE reader to the host.
ACTION: Ensure that the NRJE Reader is properly configured into the
MPE I/O configuration. Ensure that NRJE versions are correct.
9010 MESSAGE: NRJE(!:!): WARNING: NRJE READER RELEASED WHILE
WAITING FOR ‘ON READER’ MESSAGE FROM HOST. OUTPUT WILL
BE UNSOLICITED (LU=9010)
CAUSE: NRJE submitted a job to the host and was waiting for the host
“ON READER” message which would inform NRJE of the host job
number when NRJE received a command to terminate communication
with the host. Termination may have been due to any number of causes
including receiving an unexpected “UNBIND”, a communications line
failure, or a “KILL” command issued by the node manager.
ACTION: None.
9011 MESSAGE: NRJE(!:!): FAILED TO WRITE TO JOBLOG XDS (LU=9011)
CAUSE: A DMOVOUT error occurred while attempting to save the Joblog
record in the Joblog extra data segment. An internal software error.
ACTION: Contact Hewlett-Packard for assistance.
9012 MESSAGE: NRJE(!:!): FAILED TO READ FROM JOBLOG XDS
(STATUS=!) (LU=9012)
CAUSE:
ACTION:
9013 MESSAGE: NRJE(!:!): WARNING: INVALID FILE NUMBER RETURNED
BY WRITER EXIT PROCEDURE. (FSERR=!) (LU=9013)
CAUSE: An exit procedure for a writer returned a non-zero value for file
number. An FCHECK was executed on this file number and non-zero
error value returned as FSERR.
ACTION: Correct the exit procedure.
9014 MESSAGE: NRJE(!:!): FAILED TO READ FROM JOBLOG XDS (XDS=!)
(LU=9014)
CAUSE: NRJE failed to read the length value of the Joblog record from
the NRJE XDS. Internal software error.