SNA NRJE Node Managers Guide (30292-90007)

3 SNA NRJE Conﬁguration

This chapter describes how to use the NM conﬁguration manager

(NMMGR) to create or modify a hierarchical conﬁguration ﬁle for SNA

NRJE. For NRJE/V, you also must conﬁgure the virtual reader through

the SYSDUMP utility. (See the SNA Link Services Reference Manual.)

NOTE

Before you can conﬁgure SNA NRJE, you must have successfully

conﬁgured the SNA link (including logging). Conﬁguration of the SNA

link is described in the SNA Link Services Reference Manual (for SNA

Link/V) and the SNA Link/XL Node Manager’s Guide (for SNA/SDLC

Link/XL and SNA/X.25 Link/XL). You also must coordinate the SNA

NRJE conﬁguration with the ACF/NCP, ACF/VTAM, JES2 or JES3,

and VSE/POWER host conﬁgurations. Host conﬁguration is described

in the HP SNA Products guides. (See the list of related publications in

the preface of this manual.)

This chapter contains the following information:

• A description of data required from the host conﬁguration.

• An overview of the NMMGR conﬁguration for SNA NRJE.

• Directions for SNA NRJE conﬁguration.